Geotechnology, mining machines

code 2.8.8. • before 2022: 05.05.06 “Mining machines”

1. Improving the reliability of butt joints of conveyor belts at mining enterprises : a case study of the RUP "PO "Belaruskali""

   Levchenya, Zhanna Bronislavovna · 2004 · Candidate of Sciences

   • 05.05.06 Mining machines
2. Establishing the influence of the reliability of screw cutting drums on the operating mode and output of longwall shearers

   Zontov, Yuriy Vladimirovich · 1998 · Candidate of Sciences

   • 05.05.06 Mining machines
3. Selection and justification of the parameters of a cutting head with pivoting hydromechanical cutters for efficient breaking of hard rocks by selective-action roadheaders

   Katagarov, Nikolay Nikolaevich · 1993 · Candidate of Sciences

   • 05.05.06 Mining machines
4. Establishment of rational parameters of an active damping system for dynamic loads in the traction member of a frontal unit

   Zelenovsky, Evgeny Petrovich · 1993 · Candidate of Sciences

   • 05.05.06 Mining machines
5. Development of a device for reducing the toxicity of exhaust gases of underground diesel autotrains

   Zhalgasbekov, Abzal Zarubayevich · 1993 · Candidate of Sciences

   • 05.05.06 Mining machines
6. Substantiation of the main parameters of vibro-pneumatic separators for classification of limestone quarry waste

   Goncharov, Yuriy Aleksandrovich · 1992 · Candidate of Sciences

   • 05.05.06 Mining machines
7. Determination of the basic regularities of the failure process of interblasthole rock pillars and establishment of the rational parameters of a device for forming slot cavities in the rock mass

   Alexandrov, Yuriy Viktorovich · 1992 · Candidate of Sciences

   • 05.05.06 Mining machines
8. Determination of loads on large-size tires of open-pit dump trucks during movement

   Koptev, Vladimir Yuryevich · 1992 · Candidate of Sciences

   • 05.05.06 Mining machines
9. Substantiation of ways to improve the efficiency of using shearers at all stages of the life cycle

   Cherni, Aleksandr Vyacheslavovich · 1992 · Candidate of Sciences

   • 05.05.06 Mining machines
10. Forecasting the technological maintenance time of the roller frame of a belt conveyor during operation at mining enterprises

    Kravchenko, Vladimir Mikhailovich · 1992 · Candidate of Sciences · Moscow Mining Institute

    • 05.05.06 Mining machines
11. Substantiation of parameters of pneumatic transport of backfill material by cyclic-action vibration-pneumatic machines

    Yatsun, Vladimir Vasilyevich · 1991 · Candidate of Sciences

    • 05.05.06 Mining machines
12. Modeling of demolition hammer vibration and selection of rational parameters of vibration protection

    Yampol'skiy, Dmitriy Zinov'yevich · 1991 · Candidate of Sciences

    • 05.05.06 Mining machines
13. Study and improvement of the quality level of the maintenance and repair system for single-bucket excavators

    Tseveeniy Nanzad · 1991 · Candidate of Sciences

    • 05.05.06 Mining machines
14. Selection of rational parameters of short ore-delivery belt conveyors of stoping complexes

    Tsvitnenko, Nikolai Nikolaevich · 1991 · Candidate of Sciences

    • 05.05.06 Mining machines
15. Substantiation and development of a rational structure of means for equalizing the travel speed of shearers with a flexible traction organ

    Chepak, Anatoliy Alekseyevich · 1990 · Candidate of Sciences

    • 05.05.06 Mining machines
16. Substantiation of the operating principle and parameters of a compact loading machine with high-speed digging

    Chuprin, Vyacheslav Petrovich · 1990 · Candidate of Sciences

    • 05.05.06 Mining machines
17. Scientific fundamentals of improving the operating efficiency of diamond rock-cutting tools

    Cherkashin, Yuriy Aleksandrovich · 1990 · Doctor of Sciences

    • 05.05.06 Mining machines
18. Hydraulic wedge devices for splitting stone blocks from the rock mass

    Mendekeev, Rayymkul Abdymananovich · 1990 · Candidate of Sciences

    • 05.05.06 Mining machines