Hydraulic machines and hydropneumatic units

1. Development and investigation of a reciprocating hybrid positive-displacement power machine based on the use of gas pressure oscillations in the discharge line

   Lobov, Igor Eduardovich · 2016 · Candidate of Sciences · Omsk State Technical University

   • 05.04.13 Hydraulic machines and hydropneumatic units
2. Improving the positioning accuracy of the carriage of a rodless pneumatic actuator

   Shilin, Denis Viktorovich · 2016 · Candidate of Sciences · National Research University Moscow Power Engineering Institute

   • 05.04.13 Hydraulic machines and hydropneumatic units
3. Increasing the energy output of hydraulic turbine equipment at operating hydroelectric power plants during their reconstruction

   Shchur, Vasiliy Alekseyevich · 2015 · Candidate of Sciences · Peter the Great St. Petersburg Polytechnic University

   • 05.04.13 Hydraulic machines and hydropneumatic units
4. Methodology for modeling the working process of water-jet propulsors of high-speed vessels

   Abdulin, Arsen Yasharovich · 2014 · Candidate of Sciences · South Ural State University

   • 05.04.13 Hydraulic machines and hydropneumatic units
5. A technique for the calculation and modeling of the phase separation process of a gas-liquid flow in a counterflow vortex tube

   Tselishchev, Anton Vladimirovich · 2012 · Candidate of Sciences · Ufa State Aviation Technical University

   • 05.04.13 Hydraulic machines and hydropneumatic units
6. Evaluation of hydraulic performance indicators and design of multistage pumps based on quasi-three-dimensional methods

   Shchutskiy, Sergey Yuryevich · 2011 · Candidate of Sciences · Saint Petersburg State Polytechnical University

   • 05.04.13 Hydraulic machines and hydropneumatic units
7. Research and development of an axial-flow pump with adjustable guide vanes at the impeller inlet

   Khin Maung Aye · 2006 · Candidate of Sciences

   • 05.04.13 Hydraulic machines and hydropneumatic units
8. Development of a centrifugal pump for thermal stabilization systems operating under extreme conditions

   Petrov, Aleksei Igorevich · 2005 · Candidate of Sciences · Moscow State Technical University N.E. Bauman

   • 05.04.13 Hydraulic machines and hydropneumatic units
9. Calculation procedure and justification of the choice of seal parameters for the runners of radial-axial pump-turbines based on loss reduction

   Yarovoy, Andrey Viktorovich · 2003 · Candidate of Sciences

   • 05.04.13 Hydraulic machines and hydropneumatic units
10. Mathematical modeling of working processes in low- and medium-specific-speed centrifugal pumps for solving computer-aided design problems

    Zharkovsky, Aleksandr Arkadyevich · 2003 · Doctor of Sciences

    • 05.04.13 Hydraulic machines and hydropneumatic units
11. Theoretical fundamentals and experimental studies aimed at creating flow passages of vane pumps ensuring a combination of high efficiency, suction capability, and low vibration levels

    Chumachenko, Boris Nikolaevich · 2002 · Doctor of Sciences

    • 05.07.05 Thermal, electric-rocket engines and power plants of aircraft
    • 05.04.13 Hydraulic machines and hydropneumatic units
12. Development of the theory and calculation methods for screw impellers of vane pumps taking into account the thermophysical properties of the liquid

    Shcherbatenko, Igor Vadimovich · 2001 · Doctor of Sciences

    • 05.04.13 Hydraulic machines and hydropneumatic units
13. Investigation of the working process and development of the scientific fundamentals of the calculation and design of pump shaft seals with visco-elastic packing

    Gaft, Yakov Zinov'yevich · 2000 · Doctor of Sciences

    • 05.04.13 Hydraulic machines and hydropneumatic units
14. Generalized dynamic characteristics of linear models of hydraulic units

    Khasanova, Luiza Maratovna · 1999 · Candidate of Sciences

    • 05.04.13 Hydraulic machines and hydropneumatic units
15. Investigation of physical processes and fundamentals of the theory of development of jet primary transducers for highly reliable flowmeters and liquid quantity meters

    Zyubin, Igor Aleksandrovich · 1999 · Candidate of Sciences

    • 05.04.13 Hydraulic machines and hydropneumatic units
16. Improvement of the method for calculating the flow past the blade systems of hydraulic turbines and prediction of their hydraulic performance indicators

    Zakharov, Aleksandr Viktorovich · 1998 · Candidate of Sciences

    • 05.04.13 Hydraulic machines and hydropneumatic units
17. Radial forces on the rotor of a high-specific-speed pump-turbine of the radial-axial type and methods for their reduction

    Shehata, El-Said Abdel-Hay Kassim · 1997 · Candidate of Sciences

    • 05.04.13 Hydraulic machines and hydropneumatic units
18. Analysis of the operation of the seals of radial-axial pump-turbine runners and the influence of their parameters on the radial force on the rotor of reversible hydrogenerators

    Cherepovitsyn, Leonid Alexandrovich · 1997 · Candidate of Sciences

    • 05.04.13 Hydraulic machines and hydropneumatic units
19. Development of a methodology for the system design of hydraulic units of autonomous electrohydraulic servo drives

    Cherkasskikh, Sergei Nikolaevich · 1994 · Candidate of Sciences

    • 05.04.13 Hydraulic machines and hydropneumatic units
20. Improving the operational reliability of the hydraulic drive of foundry machines through rational purification of the working fluid

    Thayer, Zeneddin · 1993 · Candidate of Sciences

    • 05.04.13 Hydraulic machines and hydropneumatic units