Machines, units and technological processes

code 2.5.21. • before 2022: 05.02.13 “Machines, units and processes (by industry)”

1. Study of the effect of the fit of bobbins on the spindles of spinning spindles in order to improve their operating conditions

   Ushfun, Taufik · 1985 · Candidate of Sciences

   • 05.02.13 Machines, units and processes (by industry)
2. Investigation and development of designs of twisting mechanisms on a gas-magnetic suspension for machines producing synthetic fibers

   Shnayder, Aleksandr Grigoryevich · 1984 · Candidate of Sciences

   • 05.02.13 Machines, units and processes (by industry)
3. Development of a method and a machine for producing two-thread chain stitches of knotted structure

   Khlistunov, Valentin Sergeevich · 1984 · Candidate of Sciences

   • 05.02.13 Machines, units and processes (by industry)
4. Improvement of the separation process in an air centrifugal separator

   Sharapov, Rinat Rashidovich · 2016 · Candidate of Sciences · Orel State University

   • 05.02.13 Machines, units and processes (by industry)
5. Development of a method for bending folds using vibrating punches

   Yanichev, Denis Viktorovich · 2015 · Candidate of Sciences · Moscow State University of Printing Arts named after Ivan Fedorov

   • 05.02.13 Machines, units and processes (by industry)
6. Mass transfer processes in liquid corrosion of the first type of cement concretes taking into account the influence of Portland cement properties

   Shestorkin, Maxim Evgenyevich · 2015 · Candidate of Sciences · Ivanovo State Polytechnic University

   • 05.02.13 Machines, units and processes (by industry)
7. A hand-held grinding machine with a birotary working element for machining stone products

   Derkachev, Igor Sergeyevich · 2015 · Candidate of Sciences · Belgorod State Technological University named after V.G. Shukhov

   • 05.02.13 Machines, units and processes (by industry)
8. Structural and parametric synthesis of transport and warehouse systems of machine-building enterprises

   Shaforost, Alexander Nikolaevich · 2015 · Candidate of Sciences · Tula State University

   • 05.02.13 Machines, units and processes (by industry)
9. Method and equipment for producing foam concrete mixture using mechanically activated binder

   Shcherbinina, Olga Alexandrovna · 2014 · Candidate of Sciences

   • 05.02.13 Machines, units and processes (by industry)
10. Vibration-rotary mill with longitudinal-transverse motion of grinding media

    Gavrunov, Aleksei Yurievich · 2014 · Candidate of Sciences · Belgorod State Technological University named after V.G. Shukhov

    • 05.02.13 Machines, units and processes (by industry)
11. Batch-type grinding and mixing device

    Lymar', Il'ya Anatol'yevich · 2014 · Candidate of Sciences · Belgorod State Technological University named after V.G. Shukhov

    • 05.02.13 Machines, units and processes (by industry)
12. Determination of rational modes of the screening process in a spiral-screw inertial screen

    Rudakova, Elena Vyacheslavovna · 2014 · Candidate of Sciences · Belgorod State Technological University named after V.G. Shukhov

    • 05.02.13 Machines, units and processes (by industry)
13. Methodological and experimental support for determining the technical condition of electric submersible pump units during operation

    Shubin, Stanislav Sergeyevich · 2014 · Candidate of Sciences · Ufa State Petroleum Technological University

    • 05.02.13 Machines, units and processes (by industry)
14. Energy-saving units for grinding materials of cement production with anisotropic texture

    Romanovich, Aleksey Alekseyevich · 2014 · Doctor of Sciences · Belgorod State Technological University named after V. G. Shukhov

    • 05.02.13 Machines, units and processes (by industry)
15. Scientific principles for the design of ball mills with energy-exchange and classifying devices

    Khanin, Sergei Ivanovich · 2014 · Doctor of Sciences · Belgorod State Technological University named after V. G. Shukhov

    • 05.02.13 Machines, units and processes (by industry)
16. Process and equipment for the reconstruction of rotary kiln tyres

    Shchetinin, Nikolay Anatolyevich · 2014 · Candidate of Sciences · Belgorod State Technological University named after V.G. Shukhov

    • 05.02.13 Machines, units and processes (by industry)
    • 05.02.08 Manufacturing technology of mechanical engineering
17. Modular balancing device of a dynamic system for automatic suppression of vibration of a centrifugal grinding unit

    Stativko, Stanislav Andreevich · 2014 · Candidate of Sciences · Belgorod State Technological University named after V.G. Shukhov

    • 05.13.06 Automation and control of technological processes and production (by industry)
    • 05.02.13 Machines, units and processes (by industry)
18. Fluidized bed separator

    Kharlamov, Evgeniy Vladimirovich · 2014 · Candidate of Sciences · Belgorod State Technological University named after V.G. Shukhov

    • 05.02.13 Machines, units and processes (by industry)
19. Substantiation of parameters and operating modes of equipment for soil compaction in confined conditions

    Salyaev, Sergey Ivanovich · 2014 · Candidate of Sciences · Belgorod State Technological University named after V.G. Shukhov

    • 05.02.13 Machines, units and processes (by industry)
20. Press-roller unit for the forming of powdered and viscoplastic technogenic materials

    Shinkarev, Leonid Ivanovich · 2014 · Candidate of Sciences · Belgorod State Technological University named after V.G. Shukhov

    • 05.02.13 Machines, units and processes (by industry)