Powder metallurgy and composite materials

1. Development of a technology for producing gradient porous materials based on titanium carbide powders for gas and liquid filtration

   Shustov, Vadim Sergeevich · 2016 · Candidate of Sciences · A.A. Baikov Institute of Metallurgy and Materials Science of the Russian Academy of Sciences

   • 05.16.06 Powder metallurgy and composite materials
2. Effect of high-energy treatments on the microstructure of self-propagating high-temperature synthesis (SHS) metal-ceramic powders and thermal spray coatings "titanium carbide - nichrome"

   Chesnokov, Anton Evgen'yevich · 2016 · Candidate of Sciences · Siberian Federal University

   • 05.16.06 Powder metallurgy and composite materials
3. Development and study of the technological process for producing carbon fabrics from hydrated cellulose fibers

   Chernenko, Dmitry Nikolayevich · 2015 · Candidate of Sciences · Research Institute of Structural Materials

   • 05.16.06 Powder metallurgy and composite materials
4. Composite coatings based on intermetallics of the Ti-Al system and technologies for their deposition from vacuum-arc discharge plasma

   Vardanyan, Eduard Leonidovich · 2015 · Candidate of Sciences · Russian State Technological University named after K. E. Tsiolkovsky (MATI)

   • 05.16.06 Powder metallurgy and composite materials
5. Development of new materials for protective ion-plasma coatings with a submicrocrystalline (SMC) structure and technologies for their deposition on gas turbine engine blades

   Shekhtman, Semen Romanovich · 2015 · Doctor of Sciences · Federal State Budgetary Educational Institution of Higher Professional Education "MATI - Russian State Technological University named after K.E. Tsiolkovsky"

   • 05.16.06 Powder metallurgy and composite materials
6. Development of a technology for producing new composite materials based on Al–Al2O3 using reaction sintering in air of powder aluminum preforms

   Ivanov, Aleksandr Vladimirovich · 2015 · Candidate of Sciences · Russian State Technological University named after K. E. Tsiolkovsky (MATI)

   • 05.16.06 Powder metallurgy and composite materials
7. Development of a technology for manufacturing compact billets with enhanced mechanical properties from powder of the EP741NP heat-resistant nickel alloy produced by ultra-rapid melt crystallization methods

   Tarmosin, Evgeniy Vladimirovich · 2015 · Candidate of Sciences · Russian State Technological University named after K. E. Tsiolkovsky (MATI)

   • 05.16.06 Powder metallurgy and composite materials
8. Study of the effect of the droplet phase on the morphology, composition, and structure of coatings during pulsed laser and electron-beam deposition

   Aleksandrova, Svetlana Sergeevna · 2014 · Candidate of Sciences · Russian State Technological University named after K. E. Tsiolkovsky (MATI)

   • 05.16.06 Powder metallurgy and composite materials
9. Development of a hot stamping technology for materials of the Fe-B and Fe-P-C systems in the presence of a liquid phase

   Batienkov, Roman Viktorovich · 2013 · Candidate of Sciences · I.P. Bardin Central Research Institute of Ferrous Metallurgy

   • 05.16.06 Powder metallurgy and composite materials
10. Formation of the structure and properties of composite materials based on ultra-high-molecular-weight polyethylene reinforced with carbon fibers

    Chukov, Dilyus Irekovich · 2013 · Candidate of Sciences · Graphite Research Institute

    • 05.16.06 Powder metallurgy and composite materials
11. Development of state standard reference materials and measurement procedures for the elastic modulus and friction coefficient for the quality control and certification of nanostructured coatings

    Bychkova, Marina Yakovlevna · 2012 · Candidate of Sciences · National University of Science and Technology MISIS

    • 05.16.06 Powder metallurgy and composite materials
12. Formation of vacuum ion-plasma coatings on parts of aviation equipment and machine building

    Plikhunov, Vitaliy Valentinovich · 2012 · Doctor of Sciences · Russian State Technological University named after K. E. Tsiolkovsky (MATI)

    • 05.16.06 Powder metallurgy and composite materials
13. Powder materials based on refractory interstitial phases

    Zhilyaev, Viktor Aleksandrovich · 2010 · Doctor of Sciences · Perm State Technical University

    • 05.16.06 Powder metallurgy and composite materials
14. Influence of the nature of carbon materials on the structure and properties of powder steels

    Eremeeva, Zhanna Vladimirovna · 2010 · Doctor of Sciences · National Research Technological University

    • 05.16.06 Powder metallurgy and composite materials
15. Development of new functional materials and coatings based on multilayer reactive nanofilms in the Ti-Al and Ni-Al systems

    Yagubova, Irina Yusifovna · 2008 · Candidate of Sciences · Moscow Institute of Steel and Alloys

    • 05.16.06 Powder metallurgy and composite materials
16. Development of the theoretical foundations for calculating sealing units with components made of powder materials

    Erkenov, Akhmat Chokayevich · 2006 · Doctor of Sciences

    • 05.02.04 Friction and wear in machines
    • 05.16.06 Powder metallurgy and composite materials
17. Shock-wave synthesis of chromium-doped ultradispersed aluminum oxide and its properties

    Lyamkina, Nina Ernstovna · 2005 · Candidate of Sciences

    • 05.16.06 Powder metallurgy and composite materials
18. Development of methods for improving the strength characteristics of piezoceramics based on the optimization of its structure and composition

    Egorov, Nikolai Yakovlevich · 2004 · Candidate of Sciences

    • 05.16.06 Powder metallurgy and composite materials
19. Regularities of the influence of the method of producing the binder component on the structure and properties of a diamond-containing composite material

    Yagudin, Timofey Genrikhovich · 2004 · Candidate of Sciences

    • 05.16.06 Powder metallurgy and composite materials
20. Structural organization of interphase layers in the creation of crystal hydrate composite materials

    Yakovlev, Grigoriy Ivanovich · 2004 · Doctor of Sciences

    • 05.16.06 Powder metallurgy and composite materials