Physical metallurgy and heat treatment of metals and alloys

1. Methods of accelerated cooling for thermal and thermomechanical hardening of pipes

   Usov, Vladimir Antonovich · 2002 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
2. Regularities of the processes occurring during the operation of the shoe-wheel-rail tribosystem and ways of increasing its durability

   Petrov, Sergey Yuryevich · 2002 · Doctor of Sciences · All-Russian Research Institute of Railway Transport of the Ministry of Railways of the Russian Federation

   • 05.02.04 Friction and wear in machines
   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
3. Thermomechanical and heat treatment of pipes made of low-carbon and low-alloy steels

   Zhukova, Svetlana Yul'evna · 2002 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
4. Formation of the structure, phase composition and properties of plasma coatings made of an alloy of the Fe-Si-Al-C system

   Kovalevskaya, Zhanna Gennad'evna · 2002 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
5. Methods for predicting the plasticity and toughness of structural steels

   Sokolovskaya, Elina Aleksandrovna · 2001 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
6. Physico-mechanical regularities of the formation of the limit state and the development of local fracture in metallic materials

   Chukanov, Aleksandr Nikolaevich · 2001 · Doctor of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
   • 01.04.07 Condensed-matter physics
7. Production, structure, and mechanical properties of composite materials based on tungsten carbide with metastable matrices

   Gnyusov, Sergey Fedorovich · 2001 · Doctor of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
8. Calculation of multicomponent phase diagrams and their use for the development of alloys and improvement of their processing technology

   Smagulov, Dauletkhan Uyalovich · 2001 · Doctor of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
9. Regularities of radiation and thermal fatigue fracture of metals

   Zharkova, Natal'ya Alekseevna · 2001 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
10. Improvement of the mechanical and corrosion properties of welded pipelines

    Shatilo, Sergey Petrovich · 2000 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
11. Development of melt treatment methods for producing cast iron without graphite precipitates

    Chibryakov, Mikhail Vladimirovich · 2000 · Doctor of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
    • 05.16.02 Metallurgy of ferrous, non-ferrous and rare metals
12. Structure and properties of iron-based alloys subjected to severe plastic deformation

    Khotinov, Vladislav Alfredovich · 2000 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
13. Research and development of new high-strength weldable alloys based on the Al-Mg-Sc system and of technological parameters for producing wrought semi-finished products from them

    Filatov, Yuriy Arkadyevich · 2000 · Doctor of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
14. Development of a hard coating and a technological process for its application to tool joints of drill pipes

    Usikova, Natalya Yuryevna · 2000 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
15. Development of a technology of ultrasonic and thermal structural hardening for improving the properties of steels of cutting medical instruments

    Zakharov, Sergey Yuryevich · 2000 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
16. Methods for analyzing brittle fracture based on fracture surface topography

    Zhevnerova, Ol'ga Valer'evna · 2000 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
17. Kinetics and mechanisms of structure formation in the surface layers of pre-deformed nicotrated heat-resistant steels

    Zhigunov, Konstantin Viktorovich · 2000 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
18. Selection of a damping alloy based on the parameters of nonstationary oscillations of a structure

    Shishkin, Viktor Mikhaylovich · 1999 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
19. Structure and properties of variously alloyed steels after short-term high-temperature holds in the processes of heat treatment and plastic working

    Shakhnazarov, Artem Yuryevich · 1999 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
20. Kinetic and structural features of transformations in constitutional steels under severe plastic deformation and subsequent heating

    Chashchukhina, Tat'yana Igorevna · 1999 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys