Physical metallurgy and heat treatment of metals and alloys

1. Development of the cryoscopic method for studying binary systems of the eutectic type

   Shchapov, Vladislav Alexandrovich · 2009 · Candidate of Sciences · Rybinsk State Aviation Technological Academy

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
2. Effect of hydrogen alloying and plastic deformation on the structure and properties of Ti-6Al and Ti-6Al-4V alloys

   Shchugorev, Yuriy Yuryevich · 2008 · Candidate of Sciences · Russian State Technological University named after K. E. Tsiolkovsky (MATI)

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
3. Improvement of the wear resistance of cast parts of freight wagons by arc surfacing of a steel layer with an acicular ferrite structure

   Abramenko, Denis Nikolaevich · 2008 · Candidate of Sciences · Research Institute of Railway Transport

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
   • 05.03.06
4. Study by the X-ray method of the effect of residual stresses in solid-rolled car wheels on improving their quality

   Shitkin, Sergei Lvovich · 2007 · Candidate of Sciences · All-Russian Research Institute of Railway Transport of the Ministry of Railways of the Russian Federation

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
5. Study of the interrelation between the structure and functional properties of thermomechanically treated Ti-Ni-based shape memory alloys

   Inayekyan, Karine Ernestovna · 2006 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
6. Structure formation and development of properties in (α+β) titanium alloys during heat and thermomechanical treatments

   Shchetnikov, Nikolai Vasilievich · 2006 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
7. Scientific substantiation and development of the technology of preliminary heat treatment of structural nitriding steels

   Zhikharev, Aleksey Viktorovich · 2004 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
8. Study and modeling of recovery in the AMg6 alloy in order to predict the service life of parts of aerospace equipment

   Dobrynina, Yana Sergeevna · 2003 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
9. Creation of surface diffusion layers with high heat and wear resistance based on gas-thermal coatings in order to increase the durability of copper parts of metallurgical equipment

   Yakoev, Aleksandr Georgievich · 2003 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
10. Development of scientific fundamentals and technology of electron-beam boriding of iron-carbon alloys with the formation of refractory metal borides on the surface

    Sizov, Igor Gennadyevich · 2003 · Doctor of Sciences · Bauman Moscow State Technical University

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
11. Creation of new scientific and technological principles and development of industrial production of electrical isotropic steel for high-efficiency magnetic cores

    Cheglov, Alexander Yegorovich · 2003 · Doctor of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
12. Effect of chemical composition and heat treatment on the magnetoelastic properties of low-carbon and low-alloy steels and alloys

    Yatsenko, Tat'yana Aleksandrovna · 2002 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
13. Structure and properties of maraging steels subject to delayed fracture

    Shirikhin, Vasiliy Borisovich · 2002 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
14. Study of the effect of laser treatment parameters on the structure and properties of B83 babbitt

    Shevchuk, Viktor Kirillovich · 2002 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
15. Methodological and physical-metallurgical aspects of crack resistance and fatigue resistance of sheets made of aluminum alloys alloyed with lithium and scandium

    Shvechkov, Evgeniy Ivanovich · 2002 · Doctor of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
16. Optimization of the composition and heat treatment technology of low-carbon Ni-Mn-Mo-V steel for heat-exchange equipment of nuclear power plants

    Shulgan, Natalya Alekseyevna · 2002 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
17. Development of a hard alloy and a hardening technology for flat cutting elements of soil-cultivating machines

    Chernyshev, Yury Viktorovich · 2002 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
18. Strength of composites with a honeycomb structure based on NiAl

    Chertov, Sergey Sergeevich · 2002 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
19. Development of a low-temperature plasma generator with an expanding channel and some of its applications

    Isakaev, Magomed-Emin Khasaevich · 2002 · Doctor of Sciences

    • 01.02.05 Fluid, gas and plasma mechanics
    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
20. Magnetostructural transformation and functional properties of high-manganese alloys of the Mn - Cu system

    Vinogradova, Viktoriya L'vovna · 2002 · Candidate of Sciences · Tula State University

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys