Metal forming

1. Modeling of local overloads of rolls during thin-sheet rolling with the aim of increasing their service life

   Tsun, Aleksandr Mendelevich · 1985 · Candidate of Sciences

   • 05.16.05 Metal forming
2. Plasticity and stress state of metals under high-rate deformation

   Luts, Vladimir Yakovlevich · 1983 · Candidate of Sciences

   • 05.16.05 Metal forming
3. Development of a new combined process for producing wrought aluminum semiproducts for electrical applications

   Fakhretdinova, Elvira Ildarovna · 2016 · Candidate of Sciences · Siberian Federal University

   • 05.16.05 Metal forming
4. Theoretical study and scientific substantiation of new methods of forge drawing-out and rolling of high billets under conditions of intensive alternating-sign deformation

   Nukhov, Danis Shamil'yevich · 2015 · Candidate of Sciences · Ural Federal University named after the First President of Russia B.N. Yeltsin

   • 05.16.05 Metal forming
5. Research and development of a technological process for multicycle rolling of sheets made of composite materials based on aluminum and copper with a complex of enhanced structural and functional properties

   Evseev, Pavel Sergeevich · 2015 · Candidate of Sciences · Russian State Technological University named after K. E. Tsiolkovsky (MATI)

   • 05.16.05 Metal forming
6. Improvement of the stamping process for parts of the "flange" and "hub" type made of wrought titanium alloys VT20 and OT4-1

   Valiakhmetov, Sergey Anatolyevich · 2015 · Candidate of Sciences · Russian State Technological University named after K. E. Tsiolkovsky (MATI)

   • 05.16.05 Metal forming
7. Investigation of the forming processes of sheet and tubular blanks in the production of steeply bent pipe bends

   Shemonaeva, Elena Sergeevna · 2014 · Candidate of Sciences · Russian State Technological University named after K.E. Tsiolkovsky

   • 05.16.05 Metal forming
8. Investigation and development of the process of stamping hemispherical parts from laminated aluminum material by drawing with a plastic punch

   Galkin, Evgenii Vladimirovich · 2014 · Candidate of Sciences · Russian State Technological University named after K.E. Tsiolkovsky

   • 05.16.05 Metal forming
9. Research and development of a production technology for thin steel strips with specified properties

   Shestakov, Aleksei Vladimirovich · 2013 · Candidate of Sciences · I.P. Bardin Central Research Institute of Ferrous Metallurgy

   • 05.16.05 Metal forming
10. Improvement of the technology for manufacturing hot-pressed tubes based on new technical solutions

    Kosmatsky, Yaroslav Igorevich · 2012 · Candidate of Sciences · Ural State Technical University - UPI named after the First President of Russia B.N. Yeltsin

    • 05.16.05 Metal forming
11. Improving the efficiency of the process of rolling large threads on the basis of improving the technology and design of the tool

    Zhelezkov, Sergey Olegovich · 2011 · Candidate of Sciences · Nosov Magnitogorsk State Technical University

    • 05.16.05 Metal forming
12. Development and implementation of efficient technologies for producing high-precision flat rolled products of copper and its alloys based on the study of their physico-mechanical properties and structure

    Chasnikov, Aleksandr Yakovlevich · 2006 · Doctor of Sciences

    • 05.16.05 Metal forming
13. Study of the character of metal flow in the isothermal die forging of ribbed panels made of aluminum alloys and development of a technological process for their production

    Zharov, Maxim Vladimirovich · 2006 · Candidate of Sciences

    • 05.16.05 Metal forming
14. Optimization of the technological regimes of rolling reinforcing and section steel on the semi-continuous small-section mill of the Darkhan Metallurgical Plant

    Chigestei Davaasambuu · 2004 · Candidate of Sciences

    • 05.16.05 Metal forming
15. Features of cyclic shape change in the piercing of billets in cross-roll mills of different types taking into account the position of the guiding tool in the deformation zone

    Chepurin, Maksim Vladimirovich · 2004 · Candidate of Sciences

    • 05.16.05 Metal forming
16. Theoretical foundations, investigation, development and implementation of high-efficiency technologies for the production of seamless pipes using continuously cast billets

    Chikalov, Sergei Gennad'yevich · 2004 · Doctor of Sciences

    • 05.16.05 Metal forming
17. Research and development of a manufacturing technology for grade A500S coiled reinforcing steel using cold profiling

    Kharitonov, Alexey Viktorovich · 2003 · Candidate of Sciences

    • 05.16.05 Metal forming
18. Study of the interaction of roll guides and rolling mill rolls with the aim of improving the technological preparation of the process of rolling section profiles

    Shvarts, Danil Leonidovich · 2002 · Candidate of Sciences

    • 05.16.05 Metal forming
19. Improvement of the cold rolling technology for sheet steel to ensure the regulated longitudinal waviness of its surface

    Shponko, Aleksandr Anatolyevich · 2002 · Candidate of Sciences

    • 05.16.05 Metal forming
20. Modeling and improvement of the process of asymmetric cold rolling of steel strip

    Chernyakhovsky, Mikhail Borisovich · 2002 · Candidate of Sciences

    • 05.16.05 Metal forming