Technologies, machines and equipment for forestry and wood processing

code 4.3.4. • before 2022: 05.21.01 “Technology and machines of logging and forestry”; 05.21.03 “Technology and equipment for chemical processing of wood biomass; wood chemistry”; 05.21.05 “Wood science, wood-processing technology and equipment”

1. Features of the technological process of unloading timber from water onto the shore by means of hydraulic timber hoists

   Zverev, Vyacheslav Ivanovich · 1984 · Candidate of Sciences

   • 05.21.01 Technology and machines of logging and forestry
2. Technology of environmentally sound fire-protected wood-based panels using phosphorus- and aluminum-containing binders

   Sheloumov, Andrei Valentinovich · 2016 · Doctor of Sciences · St. Petersburg State Forest Technical Academy named after S.M. Kirov

   • 05.21.05 Wood science, wood-processing technology and equipment
3. Analysis of the structure and properties of wood raw material components by NMR relaxation methods

   Sheveleva, Nadezhda Nikolaevna · 2016 · Candidate of Sciences · Kazan National Research Technological University

   • 05.21.03 Technology and equipment for chemical processing of wood biomass; wood chemistry
4. Improvement of the process of controlling the drying of sawn timber in a microwave timber drying chamber of the resonator type

   Shulgin, Vladimir Alekseevich · 2016 · Candidate of Sciences · Northern (Arctic) Federal University

   • 05.21.05 Wood science, wood-processing technology and equipment
5. Energy-saving technology of convective drying of sawn timber based on controlled moisture transfer in wood

   Shishkina, Yelena Yevgen'yevna · 2016 · Doctor of Sciences · Northern (Arctic) Federal University named after M.V. Lomonosov

   • 05.21.05 Wood science, wood-processing technology and equipment
6. Improvement of the drying technology for larch sawn timber

   Zaripov, Shakur Gayanovich · 2016 · Doctor of Sciences · Northern (Arctic) Federal University

   • 05.21.05 Wood science, wood-processing technology and equipment
7. Improvement of knife refining of fibrous plant polymers in pulp and paper production

   Shurkina, Valentina Ivanovna · 2016 · Candidate of Sciences · Siberian State Technological University

   • 05.21.03 Technology and equipment for chemical processing of wood biomass; wood chemistry
8. Deformability characteristics as a fundamental criterion in the quality assessment of pulp and paper materials

   Kazakov, Yakov Vladimirovich · 2015 · Doctor of Sciences · Federal State Autonomous Educational Institution of Higher Education "Northern (Arctic) Federal University named after M. V. Lomonosov"

   • 05.21.03 Technology and equipment for chemical processing of wood biomass; wood chemistry
9. Improving the efficiency of wood chip production by increasing the durability of the equipment used

   Prozorov, Yaroslav Sergeevich · 2015 · Candidate of Sciences · Northern (Arctic) Federal University

   • 05.21.05 Wood science, wood-processing technology and equipment
10. Improvement of containerized transportation of chipped wood by water transport

    Shmyrev, Denis Viktorovich · 2015 · Candidate of Sciences · Moscow State Forest University

    • 05.21.01 Technology and machines of logging and forestry
11. Improving the energy efficiency of oscillating vacuum-conductive drying of sawn timber

    Mukhametzyanov, Shamil Ramilevich · 2015 · Candidate of Sciences · Kazan National Research Technological University

    • 05.21.05 Wood science, wood-processing technology and equipment
12. Development of a technology for delignification of activated wood

    Gaynullina, Daniya Shavkatovna · 2015 · Candidate of Sciences · Kazan National Research Technological University

    • 05.21.03 Technology and equipment for chemical processing of wood biomass; wood chemistry
13. Improvement of the designs and methods for monitoring the deflection parameter of crane runways of lifting structures of the timber industry complex

    Shavnina, Marina Vasilyevna · 2015 · Candidate of Sciences · Ural State Forest Engineering University

    • 05.21.01 Technology and machines of logging and forestry
14. Selection of technological parameters of high-speed wood milling based on vibroacoustic characteristics

    Cherepanov, Sergey Aleksandrovich · 2015 · Candidate of Sciences · Northern (Arctic) Federal University

    • 05.21.05 Wood science, wood-processing technology and equipment
15. Manufacturing of glued laminated wooden beams using modified binders

    Chauzov, Kirill Vladimirovich · 2015 · Candidate of Sciences · St. Petersburg State Forest Technical Academy named after S.M. Kirov

    • 05.21.05 Wood science, wood-processing technology and equipment
16. Increasing the efficiency of timber collection and transportation in coastal water areas and the shore zone of reservoirs

    Zhuk, Artyom Yuryevich · 2015 · Doctor of Sciences · Northern (Arctic) Federal University named after M.V. Lomonosov

    • 05.21.01 Technology and machines of logging and forestry
17. Ensuring analytical quality control of pulp and paper industry wastewater

    Shulgina, Elena Valeryevna · 2014 · Candidate of Sciences · Northern (Arctic) Federal University

    • 05.21.03 Technology and equipment for chemical processing of wood biomass; wood chemistry
18. Production and properties of wood composites with new cardanol-containing adhesives

    Shishlov, Oleg Fedorovich · 2014 · Doctor of Sciences · Ural State Forest Engineering University

    • 05.21.03 Technology and equipment for chemical processing of wood biomass; wood chemistry
    • 05.21.05 Wood science, wood-processing technology and equipment
19. Increasing the accuracy of the method for measuring the drilling resistance of wood

    Chernov, Vasily Yuryevich · 2014 · Candidate of Sciences · Northern (Arctic) Federal University

    • 05.21.05 Wood science, wood-processing technology and equipment
20. Improvement of the design and production technology of wall panels with a wooden frame

    Chernykh, Andrey Stanislavovich · 2014 · Candidate of Sciences · Northern (Arctic) Federal University

    • 05.21.05 Wood science, wood-processing technology and equipment