Technology and processing of synthetic and natural polymers and composites

code 2.6.11. • before 2022: 05.17.06 “Technology and processing of polymers and composites”

1. Modification of synthetic isoprene rubber with phospholipids

   Tsyganova, Marina Evgenyevna · 2012 · Candidate of Sciences · Kazan National Research Technological University

   • 05.17.06 Technology and processing of polymers and composites
2. Development of highly porous elastic grinding-and-polishing tools based on modified epoxy-novolac compositions

   Tsoi, Valeriant Viktorovich · 2012 · Candidate of Sciences · Saint Petersburg State Institute of Technology

   • 05.17.06 Technology and processing of polymers and composites
3. Controlled synthesis of carboxyl-containing amphiphilic surface-active polymers

   Yasnogorodskaya, Olga Gennadyevna · 2011 · Candidate of Sciences · Saint Petersburg State Institute of Technology

   • 05.17.06 Technology and processing of polymers and composites
4. Modified epoxy-amine polymers with enhanced resistance to thermo-oxidative degradation

   Wei Yang Hein · 2011 · Candidate of Sciences · D. Mendeleev University of Chemical Technology of Russia

   • 05.17.06 Technology and processing of polymers and composites
   • 02.00.06 Macromolecular compounds
5. Peculiarities of the manifestation of the electret effect in compositions of fluoroplastic and polyethylene with barium titanate

   Zhigaeva, Inna Aleksandrovna · 2011 · Candidate of Sciences · Kazan National Research Technological University

   • 05.17.06 Technology and processing of polymers and composites
6. Modification of polyacrylonitrile fiber to reduce flammability using hybrid fire-retardant systems

   Shcherbina, Natalya Alexandrovna · 2009 · Candidate of Sciences · Saratov State Technical University

   • 05.17.06 Technology and processing of polymers and composites
7. The effect of interphase acid-base interactions on the adhesive capacity of polymer coatings to metals

   Kustovskiy, Vitaliy Yakovlevich · 2007 · Candidate of Sciences · Kazan State Technological University

   • 05.17.06 Technology and processing of polymers and composites
8. Development of compounds resistant to heat and aggressive media for rubber-cord shells of seagoing vessels

   Khodakova, Svetlana Yakovlevna · 2007 · Candidate of Sciences · M.V. Lomonosov Moscow State Academy of Fine Chemical Technology

   • 05.17.06 Technology and processing of polymers and composites
9. Film formation of water-soluble aminated epoxyoligobutadienes

   Smirnova, Valentina Pavlovna · 2007 · Candidate of Sciences · Yaroslavl State Technical University (YaGTU)

   • 02.00.06 Macromolecular compounds
   • 05.17.06 Technology and processing of polymers and composites
10. Structure and properties of cation-exchange phenol-formaldehyde composites based on modified polypropylene filaments with altered cross-sectional geometry

    Shchelokova, Aleksandrina Viktorovna · 2006 · Candidate of Sciences

    • 05.17.06 Technology and processing of polymers and composites
11. New composite materials for optics and radio electronics: CdS and Cu/Cu2O nanoparticles in a high-pressure polyethylene matrix

    Zhuravleva, Mariya Nikolayevna · 2006 · Candidate of Sciences

    • 05.17.06 Technology and processing of polymers and composites
    • 01.04.05 Optics
12. Scientific foundations of the technology of composite textile materials and sewn products based on acrylic copolymers

    Zhilina, Elena Vladimirovna · 2005 · Candidate of Sciences

    • 05.17.06 Technology and processing of polymers and composites
    • 05.19.04 Garment technology
13. Scientific principles of the technology for processing polymer waste into filter materials for the biological treatment of industrial wastewater

    Zhuravleva, Lyudmila Leonidovna · 2005 · Doctor of Sciences

    • 05.17.06 Technology and processing of polymers and composites
    • 03.00.16
14. Adhesive materials based on sevilen blends

    Kapitskaya, Yana Vladimirovna · 2004 · Candidate of Sciences

    • 05.17.06 Technology and processing of polymers and composites
15. Effect of oxidizing-alkaline media containing enzymes and metal salts on the nature of degradation of bicomponent polymer systems based on cellulosic materials

    Rodionova, Elvira Aleksandrovna · 2004 · Candidate of Sciences

    • 05.17.06 Technology and processing of polymers and composites
16. Processing and application of modified magnetoplastics based on Nd-Fe-B in products

    Shchelokov, Yuriy Viktorovich · 2004 · Candidate of Sciences

    • 05.17.06 Technology and processing of polymers and composites
17. Composite materials based on modified styrene-containing oligomers from polybutadiene production wastes

    Chernykh, Ol'ga Nikolaevna · 2004 · Candidate of Sciences

    • 05.17.06 Technology and processing of polymers and composites
18. Fundamentals of the Technology of Polymer Composite Materials Based on Modified Petroleum Bitumens

    Chechulin, Dmitriy Valentinovich · 2004 · Candidate of Sciences

    • 05.17.06 Technology and processing of polymers and composites
19. Production of dynamic thermoplastic elastomers based on butadiene-nitrile rubbers and polyolefins using modified carbon black

    Sagdeeva, Elvira Gilfanovna · 2003 · Candidate of Sciences

    • 05.17.06 Technology and processing of polymers and composites
20. Modification of compositions for producing porous polymer materials and coatings by introducing interpolymer complexes

    Khoroshilova, Yulia Aleksandrovna · 2003 · Candidate of Sciences

    • 05.17.06 Technology and processing of polymers and composites