Physical metallurgy and heat treatment of metals and alloys

1. Production of superplastic semi-finished products of heat-resistant nickel and titanium alloys and shaping of precise blanks of large-diameter gas turbine engine disks

   Utyashev, Farid Zainullaevich · 1992 · Doctor of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
2. Formation of the structure and physico-mechanical properties of electrical steel strip during rapid quenching of the melt in a twin-roll unit

   Zapuskalov, Nikolay Mikhailovich · 1992 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
3. Investigation of structure formation in the Ni-Cr-B and Ni-Ti-B systems and development of protective coatings based on them

   Yanenskiy, Valeriy Nikolaevich · 1991 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
4. Regularities of structure formation in boron-microalloyed alloys and development on this basis of technologies for their production and processing

   Grinberg, Yevgeniy Markusovich · 1991 · Doctor of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
5. Formation of the structure and properties during cooling of hot-rolled strip coils

   Chernyshev, Al'fred Petrovich · 1991 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
6. Study of the structure and properties of high-nitrogen austenitic steels for highly loaded welded structures

   Chornamoryan, Serezha Aramovich · 1991 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
7. Effect of dispersed phases on the kinetics of texture formation during recrystallization of electrical steel

   Termer, Eduard Rikhardovich · 1991 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
8. Microalloyed cold-rolled steels with increased strength and formability

   Girina, Olga Anatolyevna · 1991 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
9. Development of the process of ion nitriding of tantalum alloys in order to increase their strength characteristics at high temperatures

   Tsikh, Sergei Gennadievich · 1991 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
10. Effect of temperature-time factors of the melt on the structure and properties of aluminum alloys

    Han Qing · 1991 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
11. Effect of the parameters of nitrogen- and hydrogen-based protective atmospheres on the technological and service characteristics of steel grades subjected to heat treatment

    Fomin, Igor Mikhailovich · 1991 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
12. Low-alloy stampable sheet steels of increased strength and ductility with a ferrite-bainite-martensite structure obtained in hot rolling

    Pimenov, Viktor Aleksandrovich · 1991 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
13. Structure and properties of low-alloy semi-killed steel strengthened with chromium nitrides

    Orel, Evgeniy Ivanovich · 1991 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
14. Development of technologies for strengthening bolt holes in railway rails

    Churyumova, Irina Anatolyevna · 1991 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
15. Development of a high-strength low-alloy steel for the automatic coupler body of freight cars

    Alpysbaev, Kabden Tursungalievich · 1991 · Candidate of Sciences · All-Russian Research Institute of Railway Transport of the Ministry of Railways of the Russian Federation

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
16. Structure, properties and fracture of pre-overheated low-sulfur structural steel

    Kut'in, Anatolii Borisovich · 1990 · Doctor of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
17. Preparation and study of the temperature dependence of the physico-mechanical properties of boron suboxide

    Tushishvili, Mamuka Chabukievich · 1990 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
    • 01.04.17 Chemical physics, combustion and explosion, physics of extreme states of matter
18. Graphitized steels for components of mining and metallurgical equipment

    Chikova, Albina Yefimovna · 1990 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
19. Development, investigation and implementation of technological processes of controlled cooling of rope-grade and special-purpose wire rod, ensuring an optimal correspondence between microstructure and technological properties

    Lutsenko, Vladislav Anatol'yevich · 1990 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
20. Effect of heat treatment regimes on the morphological features of austenite transformation products, mechanical properties, and deformability of low-carbon steels

    Sukhomlin, Vladimir Ivanovich · 1990 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys