Physical metallurgy and heat treatment of metals and alloys

1. Bainitic transformations during heat treatment of leaded brass LTs40S as a method for increasing the strength of brass cages of axle-box bearings

   Chernina, Yelena Vladimirovna · 1994 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
2. Formation of structure and mechanical properties in aging FCC alloys undergoing non-isomorphic decomposition

   Vasin, Vladimir Dmitriyevich · 1994 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
3. Effect of a coating on hydrogen charging, embrittlement, and fracture of steel

   Amin Dawai Tamir Eltimimi · 1994 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
4. Specific features of the crystallization of amorphous alloys based on the Fe-Si-B-Cu-Nb system

   Kolev, Zlatenko Dimitrov · 1994 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
5. Structure and mechanical properties of high-nitrogen steels subjected to strain hardening and precipitation hardening

   Dubovik, Natal'ya Arkad'yevna · 1994 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
6. Diffusion surface alloying of tool steels

   Kudryavtseva, Nadezhda Yakovlevna · 1993 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
7. Development of a heat-resistant alloy based on the Ti₃Al compound of the titanium-aluminum-zirconium-tungsten-molybdenum system for press tooling

   Stepanov, Yuriy Nikitich · 1993 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
8. Development and study of boriding and borocoppering processes for tool steels in a vibrating fluidized bed

   Balandin, Yuriy Aleksandrovich · 1993 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
9. Mechanisms of microplasticity, dislocation inelasticity, and strengthening of solid solutions of BCC and HCP metals with a low solubility limit

   Kanunnikova, Irina Yur'evna · 1993 · Candidate of Sciences

   • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
10. Structure of the surface friction layers and hardening of highly loaded tribological contacts by diffusion boriding

    Tarasov, Sergey Yulyevich · 1993 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
11. Development and study of the process of dynamic aging of alloy spring steels of the pearlitic class after isothermal quenching to lower bainite with the aim of increasing the reliability of springs

    Vorobyeva, Irina Gennadyevna · 1993 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
12. Selection of the heat treatment regime for medium-alloy steels based on crack resistance after tempering of various duration and slow cooling during quenching

    Shakhnazarov, Karen Yuryevich · 1993 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
13. Improvement of service characteristics of cast automatic coupler parts through the use of bulk-surface hardening of low-alloy steel

    Shotashvili, Yakov Mikhaylovich · 1993 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
14. Investigation of the structure, composition, and mechanical properties of complex boride coatings on steel

    Liu, Zhiguo · 1993 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
15. Structural and phase changes in the claddings of fuel elements made of austenitic and ferritic-martensitic steels under irradiation to high damage doses

    Tselishchev, Andrey Vasilyevich · 1993 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
16. Features of the structure of ferritic-pearlitic and austenitic class steels after electrically stimulated deformation

    Tsellermaer, Vladimir Yakovlevich · 1993 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
17. Structure and mechanical properties of the surface of metals and alloys treated with ion beams

    Tsyganov, Igor Anatolyevich · 1993 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
18. Development of new wear-resistant and nonmagnetic steels based on the study of the kinetics of phase transformations in manganese austenite

    Filippov, M. A. · 1993 · Doctor of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
19. Study of the effect of high-density pulsed current on the structure and properties of the bulk amorphous alloy Ti10 Zr40 Cu50

    Filippov, V. A. · 1993 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
20. Development of a computational method for predicting the structure in laser hardening of carbon steels for selecting rational strengthening regimes for machine parts

    Shcherbakova, Yelena Anatolyevna · 1993 · Candidate of Sciences

    • 05.16.01 Physical metallurgy and heat treatment of metals and alloys
    • 05.03.07